Experienced Quality Assurance Manager with a demonstrated history of working in the mechanical or industrial engineering industry. Skilled in Petroleum, Welding Inspection, Oil & Gas, and Quality Assurance. Strong quality assurance professional with a Bachelor's degree focused on Marine Engineering from the Institute of Technology Sepuluh Nopember.
Hi, I’m
Aryanto Agus Nugroho
QA/QC Manager
Kelapa Gading
Summary
Overview
15
years of professional experience
8
years of post-secondary education
3
Certifications
1
Language
Work History
SSE-Van Der Horst Indonesia
QA/QC Manager / Management Representative
08.2022 - Current
Job overview
- Implements, maintains and indoctrinates personnel on VDHI Quality program
- Ensures incoming material conforms to the specification
- Works closely with purchasing section to ensure conformance to the vendor certification program
- Collects, analyzes, and reports finished goods quality data
- These records shall be maintain as specification in API product specification and VDHI procedure
- Specifies requirements for gauges and fixture to monitor parts and assemblies in process
- Conducts failure analysis to determine the cause of specific defect, and with other departments to prevent reoccurrence
- Plans, manages and conducts internal quality audits
- Conducts product and process audits to ensure finished goods conformed to quality standards and expectations
- Communicates with customers and suppliers with regard to internal inspection and test data
- Ensures that all inspection, measuring and test equipment calibration status current
- Works with all departments to ensure products conform to specifications and customer requirements.
PT. Alloy Mas Oilfield Service
Quality Manager
01.2013 - 07.2022
Job overview
- Implements, maintains and indoctrinates personnel on AMOS Quality program
- Ensures incoming material conforms to the specification
- Works closely with purchasing section to ensure conformance to the vendor certification program
- Collects, analyzes, and reports finished goods quality data
- These records shall be maintain as specification in API product specification and AMOS procedure
- Specifies requirements for gauges and fixture to monitor parts and assemblies in process
- Conducts failure analysis to determine the cause of specific defect, and with other departments to prevent reoccurrence
- Plans, manages and conducts internal quality audits
- Conducts product and process audits to ensure finished goods conformed to quality standards and expectations
- Communicates with customers and suppliers with regard to internal inspection and test data
- Ensures that all inspection, measuring and test equipment calibration status current
- Works with all departments to ensure products conform to specifications and customer requirements.
Bohler Welding Group Asia PacificCikarang
QC Engineer
09.2012 - 01.2013
Job overview
- Perform Chemical and Metallurgy analyzer using SPECTROMAXx _en_03090 for every Weld Deposit and Raw Material (Core Wire)
- Perform measurement of the Ferrite Content in Austenitic and Duplex Steel using FERITSCOPE FMP30
- Perform Hardness testing for Repair & Maintenance Electrode with Universal Hardness Tester Machine “INDENTEC 8187.5 LKV”
- Perform welding performance/weldability test for every welding electrode which produce, and give the Analyzing of welding characteristic,
- Ensuring and Supervising of Destructive Test (DT) for every new product before implemented in mass production in accordance with the approved procedures
- Developed existing quality procedures for every new product before becomes mass product
- Preparing and conducting Trial for every new raw material before use in production area to ensure the specifications
- Reviewing the incoming material test certificates for core wire material, flux, rutile sand and silicate binder certificates approved material suppliers against actual material traceability
- Preparing and controlled the all types of consumables approval (ABS, DNV, BV, LR, GL, CWB and BKI), to ensure customers specifications
- Preparing and controlling all consumables certificates according to type and approved instructions
- Ensuring that Non Conformance Reports are initiated as required in accordance with the approved procedures
- Qualification and re-qualification of welders.
PT. BESMINDOTAMA SEMESTA
Welding Inspector (Supervisor)
03.2010 - 09.2012
Job overview
- Reporting to QC / QA Manager
- Qualification and re-qualification of welders
- Providing feedback to Engineering regarding WPS to be used on a job
- Ensuring that Non Conformance Reports are initiated as required in accordance with the approved procedures
- Verification and Inspection all incoming material which is shall be checked against drawing and PO for Quality, Dimension and Certification prior to acceptance
- Including filler material/ electrode
- Review Material Preparation/Pre-Fabrication by check bevel preparations are as per detail drawing, visual check for edge lamination, check heat number are properly transferred prior to cut
- Visual inspection for before, during, and after welding and prepare quality records and final acceptance document where required
- Ensure application of ASME V for non destructive examination and ASME IX or AWS D1.1 for procedure and welder qualification
- Ensure the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.
PT. BESMINDOTAMA SEMESTACibitung
Quality Control Inspector
03.2008 - 03.2010
Job overview
- Performed visual inspections and non-destructive tests where appropriate.
- Evaluated components and final products against quality standards and manufacturing specifications.
- Completed precise measurements using special tools.
- Communicated with production team members about quality issues.
Education
Institut Teknologi Sepuluh NopemberSurabaya
Bachelor of Science from Marine Engineering
07.2003 - 02.2008
University Overview
SMAN 45Jakarta
High School Diploma
04.2000 - 04.2003
University Overview
Skills
undefined
Certification
Quality Management Systems Auditor/Lead Auditor
Timeline
QA/QC Manager / Management Representative
SSE-Van Der Horst Indonesia
08.2022 - Current
Quality Management Systems Auditor/Lead Auditor
03-2015
API Specification Q1 9th Edition Training
02-2014
Quality Manager
PT. Alloy Mas Oilfield Service
01.2013 - 07.2022
QC Engineer
Bohler Welding Group Asia Pacific
09.2012 - 01.2013
Welding Inspector Training Course B4T-Bandung
04-2010
Welding Inspector (Supervisor)
PT. BESMINDOTAMA SEMESTA
03.2010 - 09.2012
Quality Control Inspector
PT. BESMINDOTAMA SEMESTA
03.2008 - 03.2010
Institut Teknologi Sepuluh Nopember
Bachelor of Science from Marine Engineering
07.2003 - 02.2008
SMAN 45
High School Diploma
04.2000 - 04.2003
Similar Profiles
Catharina Magdalena (Tarina) BothmaCatharina Magdalena (Tarina) Bothma
Administrative Clerk at LP Van Der Merwe T/a Loulanie Farming (AECI)Administrative Clerk at LP Van Der Merwe T/a Loulanie Farming (AECI)
Hudson VoigtHudson Voigt
Farm Hand at Van Der Geest Dairy CattleFarm Hand at Van Der Geest Dairy Cattle
LAETITIA VANDERKRUKLAETITIA VANDERKRUK
Administratrice web et dépannage informatique at AE VAN DER KRUKAdministratrice web et dépannage informatique at AE VAN DER KRUK
Dewi WahyuniDewi Wahyuni
Finance Accounting Manager at PT Zoomlion Indonesia Heavy IndustryFinance Accounting Manager at PT Zoomlion Indonesia Heavy Industry
Joan Jonathan SantosoJoan Jonathan Santoso
Junior Marketing Assistant Intern at PT Adi Caraka Tirta ContainerlineJunior Marketing Assistant Intern at PT Adi Caraka Tirta Containerline