Brandon Green

• Operated high-capacity AT cranes during shutdown and maintenance activities.
• Executed heavy lifts, coordinating with rigging teams in confined, high-risk environments.
• Conducted daily crane inspections, reporting faults to management immediately.
• Managed operations of 130-ton Grove AT GMK5150L and LTM 1090 Liebherr cranes.
• Oversaw lifting operations with 220-ton Tadano Demag AC-220L and 25-ton Franna crane.
• Performed rigging by reeving cranes according to lift type, ensuring safety compliance.
• Adhered to loading charts during heavy lifts to maintain operational integrity.
• Maintained cranes through inspections, lubrication of ropes and winches, and cable replacement.

• Operated 150T MacGregor subsea crane for Woodside pipeline removal project.
• Stybarrow: Singapore's successful decommissioning of the hydrocarbon pipeline through effective lift operations.
• Oversaw lift plans and conducted thorough rigging reviews before lifts.
• Coordinated lift operations with vessel bridge and ROV team at depths of 1,000 meters.
• Managed active heave compensation crane operations in swells up to three meters.
• Facilitated communication with rigging deck crew during component swaps.
• Performed daily inspections of crane components and maintained inventory of slings, chains, ropes, and shackles.
• Reported mechanical issues promptly to guarantee immediate resolutions.

• Operated 20-ton and 25-ton Franna cranes for efficient material handling in oil and gas plants.
• Executed barge crane operations with 120-ton Grove crane, ensuring effective loading and unloading of materials.
• Conducted offshore crane operations using Favco lattice boom cranes to support vessel activities.
• Reviewed and approved lift plans, ensuring adherence to safety regulations and permit requirements.
• Supported platform operations through internal rigging and lifting of heavy loads.
• Assisted in reconfiguring winch drums for high-risk mechanical lifts, improving operational safety.
• Performed monthly inspections of mooring buoys, evaluating weight, weather conditions, and crew readiness.
• Maintained accurate records of crane operations and maintenance activities.

• Operated NMF 120T vessel crane for ship-to-ship transfers between D-Class and B-Class vessels.
• Managed LNG pipe logistics for Scarborough pipe-laying campaign.
• Collaborated with logistics and planning teams to execute daily cargo operations.
• Discharged all cargo from D-Class vessels to B-Class lift type vessels, including PSV support vessels.
• Executed full discharge and transfer of cargo to another vessel on a four-on-four roster.
• Maintained accurate crane operator log books detailing seat time, jobs, locations, cranes used and daily hours.
• Ensured adherence to safety regulations at all times while operating the crane.

Operated 20-ton and 25-ton Franna cranes for diverse lifting tasks.

Utilized 120-ton and 80-ton Grove cranes for barge and platform operations.

Handled offshore Favco lattice boom cranes on Alpha platform.

Conducted winch drum reconfiguration for high-risk mechanical lifts.

Supported internal rigging and structural lifting across various worksites.

Executed equipment mobilization for island transfer and delivery operations.

Performed crane and rigging inspections, reporting faults to management.

Managed documentation including JHA and permits for deck operations.

• Supported subsea drill rig operations during tow from Malaysia to WA.
• Managed deck operations and vessel loading, ensuring compliance with JHA and permit documentation.
• Facilitated ongoing communication with vessel support for deck and vessel lifts.
• Executed mechanical rigging with chain blocks for engine, pump, and spool installations.
• Performed dogging and crane operation duties while adhering to safety protocols.
• Coordinated supply support for offshore lifts, including fuel, food, and water resources.
• Conducted daily, weekly, and quarterly inspections of cranes and rigging; reported faults to management.
• Maintained cranes by lubricating ropes, inspecting for defects, and replacing worn cables.

• Operated 25-ton Franna, 80-ton Tadano, and 150-ton SCX 1500 crawler cranes.
• Conducted lift plans and risk assessments to ensure compliance with permitting requirements.
• Led crane mobilizations, including boom installations and site planning activities.
• Executed dual lifts using 750-ton Manitou and other crawler cranes for heavy equipment placement.
• Tracked crawler cranes across slopes in coordination with riggers and site management.
• Determined load charts and rigging weights to calculate net capacity for configurations.
• Trained junior crane operators, providing clear communication and constructive feedback.
• Adhered to OSHA safety standards regarding weight capacity and ground stability.

• Supported drilling operations during four-month Jadestone campaign in Timor Sea.
• Executed deck lifting, supply transfers, and logistics coordination efficiently.
• Ensured compliance with safe dogging and rigging practices under strict no hands policy.
• Performed mechanical rigging using chain blocks for load transfer and installation on engines.
• Facilitated Billy Pue transfers for crew changeouts to support vessel operations.
• Conducted dogging and crane operating duties to enhance operational efficiency.
• Obtained building permits to ensure regulatory compliance during drilling activities.
• Contributed to drill floor support by managing materials effectively.

• Operated 20 ton and 25 ton Franna cranes for efficient material handling.
• Conducted offshore operations with 120 ton Grove crane for barge load transfers.
• Managed logistics for equipment mobilization, enhancing operational readiness from island to support vessels.
• Performed monthly inspections of mooring buoys to uphold safety and compliance.
• Executed bobcat operations for site maintenance, including road cleaning and repairs.
• Facilitated offshore planning and preparation for telescope Manni operations.
• Coordinated with logistics teams to optimize equipment transport processes through manifest guidelines.
• Trained new employees on policies, procedures, and safety protocols, emphasizing health and safety.

• Established laydown areas, storage facilities, and crane setups for operations.
• Collaborated on scopes across GTG, Ground Flare, AGRU, LNG Trains 1-3, and MEG.
• Assisted Mammoet with lifts exceeding 50 tons, including bolt-ins and structural rigging.
• Executed dual lifts using crawler cranes and supported crane configuration adjustments.
• Operated cranes for heavy lifting, transferring floating pipe sections into structures.
• Configured crawler cranes for specific heavy lift requirements and mechanical rigging tasks.
• Performed rigging for pumps, engines, and valves ranging from five to 50 tons.
• Served as Franna operator for material transfers as needed.
• Planned and prepared rigging before performances and handled rigging changes during performances.
• Identified potential hazards associated with each lift job before work began and implemented strategies for mitigating risks accordingly.

• Interpreted structural rigging plans and built models to enhance installation efficiency.
• Assembled crawler cranes, ensuring proper setup across multiple work fronts.
• Executed heavy lift rigging for installation of crushers and large components.
• Coordinated traffic control during crane operations to uphold site safety standards.
• Facilitated internal transport of steel structures utilizing floating spools from cranes.
• Collaborated with mechanical fitters for efficient installation of pumps, engines, and valves.
• Conducted punch listing to verify work completion and compliance with industry standards.
• Reported safety issues promptly to supervision for immediate resolution.
• Conducted regular maintenance checks on all equipment used in rigging operations as per company guidelines.

• Assisted shutdown teams with scaffold and rigging services in both onshore and offshore environments.
• Executed rigging duties, including chain block setup for value replacements and spool removals.
• Coordinated offshore rigging transfers to platform via vessel and helicopter.
• Conducted rigging support of chain blocks for mechanical repairs, pipe removal, and replacement.
• Constructed system scaffolding and tube-and-clip scaffolding for island support and offshore projects.
• Developed permits and ensured compliance for scaffolding operations over water.
• Provided cyclone demobilisation support by adhering to safety site requirements during preparation.
• Performed regular safety evaluations on rigging equipment to maintain operational integrity.

• Supervised scaffold team of eight personnel to ensure project efficiency.
• Managed work front allocation, timekeeping, and scaffold register compliance.
• Delivered pre-start meetings to reinforce safety protocols and operational clarity.
• Assigned work fronts while overseeing compliance with safety regulations.
• Conducted site assessments with safety supervisors during pre-start meetings.
• Reported all issues and risks to management for timely resolution.
• Facilitated toolbox meetings with scaffold team to address concerns and enhance communication.
• Maintained daily reports to track progress and resolve outstanding issues.
• Reviewed work orders before starting work to determine necessary materials and meet deadlines.
• Oversaw daily operations to ensure smooth workflow processes.
• Prepared regular reports on production output and other related activities.