Dinda Ruhyana Mubarok
Mechanical Enginer | QA/QC
Sukabumi
Summary
I am a graduate of the National Institute of Technology (Itenas), graduated in 2017 (September 7) with a GPA of 3.06. My work experience for 2 years in a consulting company engaged in energy as an Expert Assistant (Mechanical) and 6 months of experience working in a consulting company (IT) as a Mechanical Staff. and I have work on an underground tunnel construction project for MRT phase 2 (CP201) as a Drafter for 1 year. And now i work in PT. Bukaka Teknik Utama as Quality Control.
Overview
11
11
years of professional experience
1
1
Certification
Work History
Quality Control (QC)
PT. Bukaka Teknik Utama
06.2025 - Current
- Served as supervisor of dimensional inspection and material incoming inspection.
- Make a report on the inspection results.
- Arrange a quality document, ITP.
- Prepare and conduct mechanical testing.
Quality Control (QC)
KOPKAR BUKAKA TEKNIK UTAMA
05.2024 - 06.2025
- Served as supervisor of dimensional inspection and material incoming inspection.
- Make a report on the inspection results.
- Arrange a quality document, ITP.
- Prepare and conduct mechanical testing.
Quality Control (QC)
PT. BUKAKA TEKNIK UTAMA, Tbk
01.2022 - 01.2024
- KCIC – Steel Structure Kereta Cepat Indonesia – China – (Site)
- Callender Hamilton (CH) – (Site)
Drafter
Shimizu – Adhi Karya Joint Venture SAJV
01.2021 - 01.2022
- Construction of Jakarta MRT Project (Phase 2) (I) CP201: Underground Section Civil 1
Mechanical Staff
PT. Goritma Teknologi Solusindo
01.2019 - 01.2020
- Company Overview: (Buah Batu Centrum)
- My second job experience. About 6 months working as a mechanical staff in an IT consulting company. As a mechanical staff, I was given the task of making a simple machine design for sewage treatment. In carrying out my duties, I always prioritize creativity in every project I make, for example I try to make the design according to my needs, so as not to over-design. One of the achievements I have ever achieved is when I managed to create a design with a fairly high level of complexity well.
- Press Machine (2019)
- Plastic Enumerator machine (2020)
- Organic chopping machine (2020)
- Bioporous machine (2020)
- Plastic melting machine (2020)
- Plastic Enumerator machine-Dryer (in-line) (2020)
- Sieving machine (2020)
Expert Assistant
PT. Lamesit Jaya Sejahtera
01.2017 - 01.2019
- Company Overview: (Ruko Surapati Core. Block K-15. Bandung)
- During my 2 years as an expert assistant, I have always been given work related to technical drawing and location surveys for the creation of feasibility study documents. I try to make an initial design that is in accordance with the wishes of the client which will later be processed into data for the next job. Moreover, I was also assigned as a surveyor of the location of the construction of a PLTS. My best achievement is to make a Feasibility Study document and Detail Engineering Design together with the team related to the work of PLTS Sumatra, especially the Lampung region.
- Perum Jasa Tirta: Site Survey PLTS Parapat 92 kWp, Medan. For the lake Toba clean water laboratory building (2017)
- PT. Bukit Asam: Site Survey PLTS AOCC Bandara Soekarno Hatta 241 kWp, Tangerang (2018)
- Site Survey PLTS Ombilin Sawahrasau V 5,5 MW (2019)
- Site Survey PLTS Ombilin Desa Santur 22 MW (2019)
- Perum Jasa Tirta: Site Survey PLTM Kepil, Wonosobo (2019)
- PT. Primanusa Energi Lestari: Tanjung Seumantoh EFB Biomass Fired Steam Power Plant 1x12 MW Project (2019)
- PT. Lapi ITB: Pipeline Replacement Planning Design for Cooling Tower PLTP Gunung Salak (2019)
- PT. Kreasi Cipta Konsultan: Feasibility Study and DED of PLTS Sumatra (Lampung)–Ministry of Energy and Mineral Resources (2019)
- Feasibility Study and DED PLTS Riau & Kepri Region–Ministry of Energy and Mineral Resources (2020)
Internship
PT. Dirgantara Indonesia IAe
01.2015 - 01.2016
- Make a design structure of RIG for trial test N219 airplane wing component (Elevator & Rudder) using CATIA software.
Education
Bachelor of Mechanical Enginer - Mechanical Engineering
National Institute of Technology
Bandung, Indonesia 04.2001 -
SMK Negeri 1 Kota Sukabumi - Machining Techniques
SMK Negeri 1 Kota Sukabumi
01.2013
Skills
Microsoft Office
Certification
ASNT NDT Magnetic Particle Test (MT) & Liquid Penetrant Test (PT) Level 2
Personal Information
Date of Birth: 1996-04-13
Timeline
Quality Control (QC)
PT. Bukaka Teknik Utama
06.2025 - Current
ASNT NDT Magnetic Particle Test (MT) & Liquid Penetrant Test (PT) Level 2
11-2024
Quality Control (QC)
KOPKAR BUKAKA TEKNIK UTAMA
05.2024 - 06.2025
Quality Control (QC)
PT. BUKAKA TEKNIK UTAMA, Tbk
01.2022 - 01.2024
Drafter
Shimizu – Adhi Karya Joint Venture SAJV
01.2021 - 01.2022
Mechanical Staff
PT. Goritma Teknologi Solusindo
01.2019 - 01.2020
Expert Assistant
PT. Lamesit Jaya Sejahtera
01.2017 - 01.2019
Internship
PT. Dirgantara Indonesia IAe
01.2015 - 01.2016
Bachelor of Mechanical Enginer - Mechanical Engineering
National Institute of Technology
04.2001 -
SMK Negeri 1 Kota Sukabumi - Machining Techniques
SMK Negeri 1 Kota Sukabumi