Tri Mulyono

• Responsible for overseeing the reliable, safe and efficient operation of offshore platforms, ensuring compliance with industry regulations and company policies.
• Responsible for developing and implementing comprehensive safety programs, resulting in decreasing of incidents.
• Identified opportunities for continuous improvement in operational processes and safety performance
• Built a reputation as a reliable Offshore Installation Manager known for delivering projects on time without compromising quality or safety standards. through effective collaboration with offshore team, onshore supports, and contractors,
• Enhanced emergency response preparedness by developing a robust emergency management plan tailored specifically for offshore installations.
• Led and managed a diverse team of personnel, including training, performance evaluations, and conflict resolution. Led offshore team in the delivery of asset performance targets for safety, production, costs, and team development.

• OOS is right hand of Offshore Installation Manager for ensuring safe, reliable and efficient operation of Offshore Production Platform.
• OOS direct reports: Production Supervisor, Maintenance Supervisor, and Project Supervisor
• Ensure HSES program such as SAFE Observation program, Golden Rules campaign, safety Audit (Permit to Work – PTW, Job Risk Assessment) are implemented at Offshore Platform.
• Maintain plant availability and reliability to deliver production targets safely.
• Safely execute committed work program (integrity program, well service program, small project modification)
• Identify and ensure mandatory training for offshore team is compeleted as per annual training plan.
• Ensure ISO, OSHAS and PROPER rating is retained by complying the environmental standard for produce water discharge, review and control of operation Standard Operating Procedure, and ensuring offshore personnel to get training/socialization of the procedure.
• Manage and coordinate with related parties in order to ensure efficient and cost effective planned shutdown activities at Anoa Anoa Platform.

• Provide technical assistance for day to day Offshore Operation (Anoa/AGX Platform and Anoa FPSO).
• Optimize oil and gas production from Anoa/AGX Platform
• Improve plant reliability by identifying operational issue related to safety, production, maintenance and convey this information to Technical Support Department for following up.
• Assist operation team to execute minor project and assist commissioning and start-up of the new equipment

• Involved in developing Anoa Safety Case update
• Participate in HAZOP/HAZID
• Supported safety inspection, providing information and facilities guidance during walk-throughs.
• Rectified/repaired safety equipment such as Foam Fire Extinguisher System, replaced Halon with FM-200.

Project Name:

• Soka Gas Associated Gas Utilization (converted 9 mmscfd flared gas to sales gas)
• Enhanced Oil Recovery (Engineering stage)
• Lagan Phase-2 at South Sumatra Extension (installation of 4 Reciprocating compressor with capacity of 16 MMSCFD to maintain gas production due to natural depletion of the wells)

Roles and Responsibilities:

• Conducted feasibility study for any field modifications.
• Conducted site survey to determine tie-in and lay out of new equipment.
• Developed PFD, P&ID, piping plan, data sheet for field modification.
• Prepared technical specification for tender
• Provided technical assistance during engineering, installation, start-up and commissioning.

Project Name:

• Basic Design 3 (three) Wellhead Platform (WP15, WP16 and WP17) and associated pipeline.
• EPCI Sisi Nubi Production Separator (Finger type Slug Catcher) with capacity of 450 MMSCFD
• Basic Design PAZFLOR FPSO - Angola. Engineering design was performed in Saipem SA, France.

Roles and Responsibilities:

• Performed Process Simulation and Blowdown Simulation using HYSYS software.
• Performed equipment and line sizing
• Developed Process Data Sheet.
• Develop Develop PFD (Process Flow Diagram), P&ID (Piping and Instrumentation Diagram), Safe Chart, and Utility Balance.
• Simulated and designed of the Vent System using FlareNet

Project Name:

• EPCI Project - Mini Gas Plant designed for receiving 20 MMSCFD from 2 (two) Gas Wells.
• EPCI Project – North Geragai Gas Expansion to process 45 MMSCD Natural Gas into sales gas (as per buyer specification), LPG, and Condensate by using Joule Thompson effect.

Roles and Responsibilities:

• Equipment and Line sizing
• Develop Develop PFD (Process Flow Diagram), P&ID (Piping and Instrumentation Diagram).
• Developed Process Data Sheet
• PSV calculation
• Review Vendor Document

Project Name:

BP West Java Engineering Services
As Process Engineer for the following project:

• ZUA – ZUD Crude Oil Pipeline Installation. This project is intended to reduce flowing wellhead pressure of the wells so it increased oil production of the Zulu area.
• FEED (Front End Engineering Design) – Pagerungan Booster Compressor. This project was to evaluate additional booster compressor to maintain gas production in the Pagerungan Field. Booster Compressor need to be installed due to gas wells was depleted naturally.
• Echo Water Flood – secondary recovery for oil field at Echo (E) field.
• Engineering design for 4 Wellhead Platforms (ESRA, BZNA, JJA, and KKA)
• KILO-BRAVO top modification. Review the existing facilities to accommodate additional crude production from new Platform (JJA)
• L/KL De-bottlenecking Project. Engineering study to upgrade MMF Compressor for de-bottlenecking gas from LLD and KLXY Platform.

Roles and Responsibilities:

• Process Simulation using HYSYS software.
• Reviewed existing Equipment, equipment sizing and line sizing.
• Develop PFD (Process Flow Diagram), P&ID (Piping and Instrumentation Diagram).
• Equipment selection.
• Prepared Process Data Sheet.
• Prepared Tender Documentation.
• Assist installation of the piping/equipment.
• Developed training material for technician.