Hardworking professional well-versed in handling materials, operating machinery and supporting overall team and project needs. In-depth knowledge of compliance mandates governing site and worker safety. Focused on helping complete skilled work under deadlines.
Overview
6
6
years of professional experience
1
1
Certification
Work History
Labor
Northland Homes
Coeur D'Alene
02.2025 - 06.2025
Operated excavator to dig trenches, footings and foundations for new construction projects.
Repaired damaged structures using appropriate methods such as hammering, sawing, drilling.
Assembled staircases according to code requirements.
Connected headers over windows and doorways in order to provide support for the structure's load bearing capacity.
Assisted other workers in loading and unloading materials onto job sites when needed.
Covered exposed areas with plastic sheeting when painting or staining was required.
Applied roofing tar paper as necessary prior to the installation of siding.
Installed insulation in walls or ceilings using various materials such as fiberglass batting or foam board insulation.
Assembled and installed cabinetry according to manufacturer instructions.
Planned and coordinated remodeling projects, including scheduling subcontractors and ordering materials.
Framer
Mountain Meier Builder LLC
Eureka
09.2024 - 02.2025
Attached insulation material between wall studs or ceiling joists to provide thermal protection.
Built scaffolding for workers engaged in high-level construction projects such as roofing applications.
Removed old framing components from buildings undergoing renovation work.
Hung fireproof doors on their hinges after properly measuring their openings.
Stacked materials neatly at job sites in order to maintain a safe environment free from clutter.
Cut metal lath to size for reinforcing stucco finishes on walls and ceilings.
Inspected existing structures for signs of damage due to age, wear and tear or environmental factors.
Constructed wood trusses and rafters according to specifications.
Applied weatherproofing treatments such as caulking around exterior frames prior to installation.
Operator
All In Excavation
Eureka
03.2024 - 09.2024
Set up tools, dies, jigs, fixtures, gauges and other related parts for use in production operations.
Maintained cleanliness of work area and equipment in accordance with safety regulations.
Monitored and adjusted machine operations as needed for quality assurance.
Performed routine maintenance on equipment to ensure optimal performance.
Managed multiple tasks simultaneously while maintaining attention to detail.
Maintained records relating to product output numbers, scrap rate analysis, downtime reports.
Assisted in the setup of production lines according to customer specifications.
Inspected finished products to verify conformity to quality standards.
Telecommunications Technician
Montec
Eureka
03.2023 - 03.2024
Assisted with training users in the use of various telecommunication devices and applications.
Configured VoIP phones for customers on the company's private branch exchange.
Collaborated closely with other IT personnel on projects related to telecom infrastructure upgrades.
Performed regular maintenance checks on telecom equipment to ensure proper functioning.
Operated excavator to dig trenches, footings and foundations for new construction projects.
Assisted in the installation of underground utilities including water lines, sewer lines and electrical conduits.
Performed daily maintenance checks of excavator such as fluid levels, hoses, belts and filters.
0311 Infantry Rifleman
USMC Camp Pendleton
Camp Pendleton South
01.2022 - 10.2022
Conducted reconnaissance missions to gather intelligence on enemy forces.
Assisted with minefield clearance operations by locating mines using metal detectors.
Performed guard duty and maintained security of assigned areas.
Supervised loading and unloading of supplies from aircrafts and motor vehicles.
Conducted foot patrols to detect enemy activity, suspicious persons, and weapons caches.
Participated in search-and-rescue operations involving missing personnel or downed aircrafts.
Responded to emergency situations as required including medical evacuation requests.
Took part in training exercises designed to improve individual skillsets and collective unit capabilities.
Prepared written reports detailing events that occurred during missions or exercises.
Inspected various pieces of military equipment for serviceability prior to use in the field.
Followed orders from superiors promptly without hesitation; completed tasks within specified deadlines.
Foreman
Meier Construction LLC
Eureka
11.2021 - 01.2022
Supervised the installation of drywall on commercial and residential projects.
Inspected worksites to ensure compliance with building codes and regulations.
Assisted in resolving disputes between customers over unsatisfactory workmanship issues.
Identified areas where efficiency could be improved in terms of time or cost savings.
Monitored workers' performance to ensure that they were following instructions correctly.
Managed the daily activities of a team of 15 drywall installers and finishers.
Ordered materials, tools, and supplies needed for jobsite operations.
Scheduled breaks for employees throughout the day to maintain productivity levels.
Adhered to local health and safety regulations when working on job sites.
Forklift Operator
Coeur D Alene builders Supply
Coeur D'Alene
09.2021 - 11.2021
Performed daily maintenance checks on forklifts to ensure optimal performance.
Verified accuracy of incoming orders against packing slips before loading onto truck and trailer for shipment.
Loaded pallets onto trailers for shipment.
Assisted in the loading and unloading of goods from trucks, containers and railcars using forklift.
Unloaded delivery trucks with product by hand or utilizing lift-gate truck when needed.
Collaborated with team members on various tasks related to storage and transport operations.
Ramp Agent
American Airlines
Columbia
06.2021 - 08.2021
Performed pre-flight maintenance checks such as tire pressure and fuel levels on ground service equipment.
Prepared detailed reports summarizing activities performed during shift.
Followed safety procedures such as using reflective gear while working on the ramp.
Assisted passengers in finding their lost luggage at baggage claim areas.
Assisted passengers with special needs including wheelchairs, strollers, and other mobility aids.
Checked flight manifests to ensure accuracy of luggage loaded onto planes.
Ensured proper weight balance on aircrafts by placing heavy items in the aft of the plane.
Provided customer service assistance by answering inquiries from passengers regarding arrival and departure times and gate information.
Verified correct labeling of containers containing hazardous materials for transport on planes.
Lube Service Technician
Jiffy Lube
Columbia
03.2021 - 05.2021
Followed all safety regulations when working on vehicles to prevent accidents or injury to personnel.
Cleaned exterior surfaces of vehicles using appropriate cleaning products.
Communicated regularly with customers regarding the status of their vehicles' repairs or maintenance needs.
Conducted visual inspections for signs of wear or damage in belts and hoses.
Assisted in maintaining cleanliness of service bays by cleaning up spilled fluids or debris after job completion.
Checked fluid levels of transmission, power-steering, brake and cooling systems.
Ensured that all tools were returned to designated storage areas at end of shift.
Fabrication Welder
Cooper Fabrication
Post Falls
09.2020 - 12.2020
Repaired damaged metallic components utilizing welding techniques such as gas tungsten arc welding or shielded metal arc welding.
Attended regular safety meetings to stay up-to-date on best practices while working with hazardous materials.
Operated forklifts to move large components around the shop floor.
Identified any defects in the fabrication process and took corrective action when necessary.
Maintained a clean work area in accordance with safety regulations.
Fabricated metal components and structures according to blueprints, drawings, and written specifications.
Cleaned and prepared surfaces for welding operations by grinding, sanding, or polishing as needed.
Deposited intermittent tack welds for fit-up and alignment of work assemblies.
Checked cut length frequently for deviation in cut length specs.
Labor
Costa Fab
Rathdrum
05.2019 - 09.2019
Maintained a clean work area in accordance with safety regulations.
Cut metal parts with oxyacetylene torch and plasma cutter.
Assisted with the installation of fabricated items at customer sites.
Fabricated metal components and structures according to blueprints, drawings, and written specifications.
Communicated effectively with team members regarding progress of tasks assigned throughout the day.